Makita Rocks the WOC
Makita presents latest concrete solutions at WOC 2011.
Makita joined nearly 50,000 concrete contractors and dealers under brilliant sunny skies in Las Vegas for four days of hammering, surfacing and drilling at the annual World of Concrete trade show. Makita brought its Experience More 53-foot interactive tool display on wheels and offered attendees hands-on demonstrations of its latest concrete solutions, with several tons of 4,000 PSI concrete formed in flat slabs and upright walls so attendees could try out the tools for themselves.
"Makita power tools deliver industrial strength performance with less vibration in a more compact size, and are engineered to beat up the concrete, not the end user. World of Concrete is a great opportunity to demonstrate these concrete solutions in an interactive setting,” said Wayne Hart, communications manager, Makita USA. “This year we offered more new products with more concrete and more demonstrations, and the response was overwhelmingly positive. Once again, World of Concrete delivered great weather, and a great audience that stepped up and felt the difference for themselves.”
Makita offered several hands-on demonstrations of new and existing products, including three brand new demolition hammers: the HM1307CB 35lb (1-1/8” Hex), HM1203C 20-pound (SDS-Max) and HM0870C 11-pound (SDS-Max), as well as two new dust extraction accessories.
Key products showcased at the event include:
• HM1307CB 35-pound Demolition Hammer: Combines more control and less vibration with hard-hitting power. The new HM1307CB is powered by a 14 AMP Makita-built motor with 34.9 Joules of impact energy and 730-1,450 BPM. At only 12.2 m/s2 vibration, the HM1307CB is engineered to deliver more power to the work surface for more efficient work. Ease-of-use features include a rubberized ergonomic soft grip to provide more comfort and control, and the easy-to-operate slide switch to increase productivity and allow for continuous use. In addition, the side-handle swivels 360° for greater control.
• HM1203C 20-pound Demolition Hammer: Engineered with more power, more impact energy, and less weight than the previous model. The new HM1203C is powered by a 14 AMP Makita-built motor with 18.8 ft. lbs./ 25.5 joules of impact energy and 950-1,900 BPM. At only 15.5 m/s2 vibration, the HM1203C is engineered to deliver more power to the work surface for more efficient work. The HM1203C weighs only 20.3 lbs. for an improved power-to-weight ratio, and it’s ideal for vertical and horizontal applications.
• HM0870C 11-pound Demolition Hammer: Engineered with more power than the previous model. The new HM0870C is powered by a 10 AMP Makita-built motor with 11.4 joules of impact energy and 1,100 – 2,650 BPM.
At only 11.0 m/s2 vibration, the HM0870C is engineered to deliver more power to the work surface for more efficient work. The HM0870C weighs only 11.1 lbs. for improved power-to weight ratio.
• #193472-7 Dustless Hammer Attachment: World of Concrete attendees tried out Makita’s new Dustless Hammer Attachment #193472-7, and discovered several advantages vs. competitive built-on systems including better tool performance (competitor built-on vacuum motors draw power from the tool resulting in less impact energy/BPMS), and longer cordless run time (battery has to power both the vacuum motor and tool motor on competitive tools, greatly decreasing the tool runtime on one charge).
Other advantages include better dust extraction (industrial vacuums are much more powerful than built-on systems, and the result is more efficient dust extraction), and smaller size and less weight (25% less weight without vacuum components and motor attached to the tool). The new Dust Hammer Attachment features a 17” hose, telescoping springloaded barrel, depth stop and bit size adjustment knobs, and a built-in ruler.
• Grinder Dust Shroud: Makita also demonstrated the new dust shroud accessory for 4-1/2” – 5” Grinders. The accessory features a 4-spring suspension system that keeps the shroud flush with surface during movement and compensates for blade wear, a removable edge piece for surface work flush to edges or other objects, and soft brushes that prevent dust from escaping and help move the tool over the surface all along edge. The standard hose fitting (OD 1-7/16”) will work with most vacuum systems. The new Dust Shroud is ideal for concrete finishing, concrete material removal, and paint or surface coating removal.
• Cordless Solutions: In 2005 Makita launched the industry’s first 18V Lithium-Ion line-up, and today there are over 35 cordless solutions – and one battery. Makita offered demonstrations of several cordless solutions for concrete contractors including SDS-PLUS Rotary Hammers (BHR202, BHR241), the ½” High Torque Impact Wrench (BTW450), and the new 18V Compact Lithium-Ion Cordless ½” Driver-Drill (LXFD01CW).
CONTRACTOR SUPPLY MAGAZINE
The April/May 2024 issue of Contractor Supply magazine is here!
This digital edition is sponsored by BECK AMERICA Inc.
Our cover story, Masters of Fasteners, visits Interstate Screw Corp. of metro Miami, which serves the fastening needs of south Florida, the Caribbean and Central and South America.
Also in this issue,our Industry Updates cover Adhesives, Tapes and Sealants, Anchoring Systems and Safety and PPE.
This digital edition is fully searchable and contains live links to every advertiser and new product listing. Click away!
