Menu

Milwaukee Launches 14 New Hand Tools and Sets

New tools include demolition and insulated screwdrivers, nut drivers and multi-bit drivers.


Milwaukee Tool continues to rapidly expand its hand tool offering with 14 new fastening solutions. In May 2013, Milwaukee will launch four new Nut Drivers in a set, four 10-in-1 Multi Bit Driver Sets, three Hex/Torx Key Drivers and six new Screwdriver Sets, all with a focus on user driven innovation to provide real solutions to jobsite challenges.

4-Piece SAE Nut Driver Set

The only tools in this category with universal driver heads, the new Milwaukee Nut Drivers fit 4X more fasteners including Square, Hex, 12 point & Spline, and have the ability to remove rusted and stripped bolts.

In addition, the Milwaukee® 4PC SAE Nut Drivers feature a 3” hollow shaft design, allowing users to drive fasteners on long bolts or threaded rod applications with ease. The drivers also feature wrench-ready hex steel shanks that are forged and chrome plated for maximum durability and additional leverage. For added user convenience, multiple ID markings allow for quick tool identification on the jobsite.

4PC Hollow Shaft SAE Nut Driver Set (48-22-2404) Includes:

  • 9/16" - 3" Shaft Nut Driver
  • 7/16" - 3" Shaft Nut Driver
  • 5/16" - 3" Shaft Nut Driver
  • 1/4" - 3" Shaft Nut Driver

10IN1 Multi Bit Drivers

New 10IN1 Multi Bit Drivers all feature 3-1/2” power groove bits for power tool compatibly and extended reach. This exciting launch will include (2) Multi Bit Drivers, (2) Ratcheting Multi Bit Drivers and (3) Key Driver Sets. Each tool also features chrome-plated bits for marine grade rust protection and magnetic bit retention. Additional inclusions like the wire stripper, loop maker and wrench-ready hex shank provide further jobsite functionality for increased productivity.

10IN1 Multi Bit Drivers

  • 10IN1 ECX™ Multi Bit Driver (48-22-2101): 10 functions include ECX™ #1, ECX™ #2, PH #1, PH #2, SL 1/8”, SL 1/4”, SQ #2, wire stripper, loop maker and ¼” nut driver.
  • 10IN1 Square Drive Multi Bit Driver (48-22-2102): 10 functions include SQ #1, SQ #2, SQ #3, PH #1 PH #2, SL 1/8”, SL 1/4”, wire stripper, loop maker and ¼” nut driver.
  • 10IN1 ECX™ Ratcheting Multi Bit Driver (48-22-2301): 10 functions include ECX™ #1, ECX™ #2, PH #1, PH #2, SL 1/8”, SL 1/4”, SQ #2, wire stripper, loop maker and ¼” nut driver.
  • 10IN1 Square Drive Ratcheting Multi Bit Driver (48-22-2302): 10 functions include SQ #1, SQ #2, SQ #3, PH #1 PH #2, SL 1/8”, SL 1/4”, wire stripper, loop maker and ¼” nut driver.

Hex/Torx Key Drivers

  • 10IN1 Torx Key Driver (48-22-2103): 10 functions include TORX T8, T10, T15, T20, T25, T27 and T30, wire stripper, loop maker and 1/4” nut driver.
  • 10IN1 HEX Key Driver SAE (48-22-2104): 10 functions include HEX 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32” and 1/4”, wire stripper, loop maker and 1/4” nut driver.
  • 10IN1 HEX Key Driver Metric (48-22-2106): 10 functions include HEX 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, wire stripper, loop maker and 1/4” nut driver.

Insulated Screwdrivers

Milwaukee Tool introduces the first and only UL Classified 1000V Insulated Screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards. Milwaukee 1000V Insulated Screwdrivers meet the OSHA insulated tool requirement and provide an uncompromising safety rating for the jobsite.

With a flame resistant insulation bonded to the tool shank as well as an outer layer of insulation, the new tools offer a dual layer for maximum safety and keep the driver protected from damage. To further provide safety, a visual wear indicator issues a warning to the user when it is time to replace the tool. For added user convenience, insulated ID markings allow for quick tool identification on the jobsite and a lanyard hole prevents tool drops in live panels and protects both the insulation and driver from damage.

Insulated Screwdrivers include:

  • 3PC Insulated Screwdriver Set (48-22-2202): Includes SL 1/4” (6” Shank), PH #2 (4” Shank) & ECX™ #1 (4” Shank)
  • 4 PC Insulated Screwdriver Set (48-22-2204): Includes SL 1/4” (6” Shank), SL 3/8” (8” Shank), PH #1 (3” Shank), PH #2 (4” Shank) & Extra Capacity Tool Pouch
  • 10 PC Insulated Screwdriver Set (48-22-2210): Includes SL 1/4” (6” Shank), SL 5/16” (7” Shank), SL 3/8” (8” Shank), PH #1 (3” Shank), PH #2 (4” Shank), PH #3 (6” Shank), SQ #1 (3” Shank), SQ #2 (4” Shank), SQ #3 (6” Shank), ECX™ #1 (4” Shank) & EVA Foam Fitted Case

Demolition Screwdrivers and Screwdriver Sets

Milwaukee’s new demolition screwdrivers and screwdriver sets feature hardened tips and forged shanks to provide maximum precision and durability to the user. Heat-treated steel caps also provide 2X longer life and increased durability in striking and prying applications.

Featuring a user-preferred barrel handle, anti-roll design, the new screwdrivers are carefully designed for the professional user. For added productivity and convenience, multiple ID markings allow for quick tool identification on the jobsite.

Screwdriver Expansion includes:

  • 2 PC Demo Drivers w/ Steel Caps (48-22-2002): Includes PH #2 (6” Shank w/ Steel Cap) & SL 5/16” (6” Shank with Steel Cap)
  • 6 PC General Purpose Screwdriver Set (48-22-2006): Includes SL 1/4” (4” Shank w/ Steel Cap), SL 5/16” (6” Shank w/ Steel Cap), PH #1 (3” Shank), PH #2 (4” Shank), Cabinet 3/16” (3” Shank) & Cabinet 3/16” (6” Shank)
  • 8 PC Screwdriver Set w/ Square Drive (48-22-2009): Includes SQ #1 (4” Shank), SQ #2 (4” Shank), SL 1/4” (4” Shank w/ Steel Cap), SL 5/16” (6” Shank w/ Steel Cap), PH #1 (3” Shank), PH #2 (4” Shank), ECX™ #1 (4” Shank) & ECX™ #2 (4” Shank)

Learn more at www.milwaukeetool.com

SPONSORED ADS