Tube Fin Removal Tool Speeds Peeling For Inspection
Esco Tool has introduced a portable spirally wound tube fin removal tool.
 |
The Fin MILLHOG is designed for peeling fins from boiler tubes in heat recovery steam generators and coal-fired power plants.
It mounts rigidly to the tube I.D. and can peel back 4 inches of fin from a boiler tube in under 2 minutes and bevel simultaneously without cutting oils.
Eliminating chipping hammers and grinders, it features a patented cutter blade and rack and pinion feed that lets the operator disengage the feed and clear the separated fin quickly.
For efficiency and easier operation, the Fin MILLHOG has wrenches conveniently attached.
Equipped with a 1.25 HP pneumatic motor, the range of the tool is 1.25-inch I.D. to 3-inch O.D. and models are available for both left and right hand spirally wound fin.
CONTRACTOR SUPPLY MAGAZINE
The June/July 2026 issue of Contractor Supply magazine is here!
In our cover story, Service Over Scale, Idaho Tool in Nampa, Idaho follows a philosphy of immediacy, expertise, and advocacy through 40 years of change and success.
Also in this issue are Industry Updates.
This digital edition, sponsored by BECK AMERICA Inc., is fully searchable and contains live links to every advertiser and new product listing. Click away!
| Read the Articles Read the Digital Edition |
