Power Nailers & Staplers: Apach CN-565 and RN-45E2 Coil Nailers

The CN-565 Siding Nailer is perfect for siding and fencing applications. This tool uses a 15-degree plastic or wire collated nail, with a range from 1-1/4” to 2-1/2”, and a .090 to .099 shank size.

It features a depth of drive adjustment and a bump fire trigger for rapid production.

The CN-565 features:

• Canister capacity drives 250 to 400 nails per full load
• Accepts both 15-degree wire and plastic collated nails
• Bump fire trigger for rapid production
• Tool free dial-a-depth safety yoke
• High durability driver blade
• No-mark rubber pad available
• Weighs 5.9 pounds

The RN-45E2 coil nailer has recently been updated. The tool now boasts a depth of drive adjustment and a magnet in the nose to help stabilize the last few nails in the coil.

This tool is fast, light and well balanced to keep fatigue at a minimum. It will accept 7/8” to 1-3/4” roofing coil nails.

The RN-45E2 features:

• Well balanced ergonomic design
• Tool free depth adjustment
• Carbide insert in tip to decrease wear
• Low vibration, less fatigue
• See-thru side loading magazine
• Integrated Magnet in Nose to hold the last nail
• Weighs 5.7 pounds

For information, call 888-392-9947 or visit www.axxisus.com.