Page 144
Currently Viewing: Product Carousel
Hougen 75002.5PR and 75004PR Hole PunchersPortable Electric Tools

Portable Electric Tools: Hougen 75002.5PR and 75004PR Hole Punchers

The new 75002.5PR (left) and the 75004PR Electro-Hydraulic Hole Punchers from Hougen provide 10.1 and 16.9 tons of punching pressure respectively.Hougen Manufacturing (Swartz Creek, MI), has added two new electro-hydraulic hole punchers to their lineup of hole punching machines. The new Hougen-Ogura models 75002.5PR and 75004PR feature a lightweight single body construction allowing you to punch holes in steel in as little as 2.3 seconds.

Both models include the new “Power Retractable” Punch system which allows the user to power reverse the punch back out of hole. This improves productivity in harder, more elastic materials which tend to grip the punch (not allowing it to auto return to the home position) after the hole is produced. The punch units are lightweight at 24.9 lbs (11.3 kg) and are easy to move around and operate.

Both the 75002.5PR & 75004PR use only electrical power to operate the motor and the self-contained hydraulic system. No additional hydraulic pumps or hoses are needed. The 75002.PR provides 10.1 tons of punching pressure to punch round holes up to ¾” (19mm) in diameter through ¼” (6.4mm) material and oblong holes up to 9/16” x 13/16” (14mm x 21mm).

The 75004PR has an increased punch pressure of 16.9 tons and can punch round and oblong holes in materials up to 3/8” (9.5mm) thick. Both units can punch holes in flat bar, H-steel, angle iron and channel.

The electro-hydraulic hole punchers use the exclusive Hougen-Ogura punch and dies which are available in a wide variety of sizes. Accurately locating the hole position is easy with the punch jog down feature and the adjustable throat depth gauge.

The punch units are available in 120V & 230V power options and come standard with a work stand for placement of the punch on a work table and a foot switch for hands free operation.

www.hougen.com