Snap-on Industrial Plasma Cutters

Snap-on Industrial’s line of Plasma Cutters can cut up to 3/4” thickness on a variety of ferrous, non-ferrous and high-strength materials.

Snap-on Industrial’s Plasma Cutters feature depth-of-cut adjustability, which allows the top layer of material to be cut without disturbing the base layer. Making these cuts possible is inverter technology that drives a small yet powerful package size allowing for portability out in the shop or on the job site.

Performance specifications of Snap-on Industrial’s Plasma Cutters:

PLASMA20i

• Maximum output amps: Adjustable 5-20
• Cut thickness: 1/4”
• Sever thickness: 3/8”
• Primary input (Volt AC): 115
• Primary input: 20 A
• Duty cycle rating: 100% at 15 A
• Minimum compressed air requirements: 50 PSI at 5 CFM
• Torch and ground cable lengths: 12’

PLASMA30i

• Maximum output amps: Adjustable 5-25
• Cut thickness: 3/8”
• Sever thickness: 1/2”
• Primary input (Volt AC): 115 or 230
• Primary input: 30 A 115 V or 20 A 230 V
• Duty cycle rating: 60% at 22 A
• Minimum compressed air requirements: 50 PSI at 7 CFM
• Torch and ground cable lengths: 12’

PLASMA60i

• Maximum output amps: Adjustable 20-55
• Cut thickness: 3/4”
• Sever thickness: 3/4”
• Primary input (Volt AC): 208/230
• Primary input: 40 A
• Duty cycle rating: 60% at 40 A
• Minimum compressed air requirements: 68 PSI at 7 CFM
• Torch and ground cable lengths: 18’

Additionally, consumable kits are available for all three plasma cutters that include nozzle holders, nozzles, swirl rings and electrodes. The part numbers for the three consumable kits:

• PLASMA20KIT
• PLASMA30KIT
• PLASMA60KIT

For more information on Snap-on Industrial’s line of Plasma Cutters, call (877) 740-1900, or visit https://b2b.snapon.com/