Page 2150
Currently Viewing: Product Carousel
Simpson Strong Tie Strong-Rod continuous rod tiedown systemsAnchors

Anchors: Simpson Strong Tie Strong-Rod continuous rod tiedown systems

With the new Simpson Strong-Tie Strong-Rod continuous rod tiedown systems, featuring new code-listed components and optimized rod-run assemblies, designers have cost-effective and code-tested options for light-frame, mid-rise wood construction.

The Strong-Rod Anchor Tiedown System for shearwall overturning restraint (ATS) and Strong-Rod Uplift Restraint System for roofs (URS) address many of the design challenges specifically associated with mid-rise buildings that must withstand seismic activity or wind events. These systems are designed to restrain both lateral and uplift loads, while maintaining reasonable costs on material and labor.

Strong-Rod ATS solutions address the many design considerations necessary for ensuring proper performance against shearwall overturning, such as rod elongation, wood shrinkage, construction settling, shrinkage compensating device deflection, incremental loads, cumulative tension loads and anchorage.

Strong-Rod URS solutions focus on effective performance against roof uplift, taking into account factors such as rod elongation, wood shrinkage, rod-run spacing, wood top-plate design (connection to roof framing, reinforcement at splices, bending and rotation restraint) and anchorage.

“It’s complicated designing multi-story buildings for these conditions. We want to share our testing and design expertise with Designers so they have the safest building possible with materials specifically designed for this application,” said Tim Ellis, Simpson Strong-Tie product manager. “With our new Strong-Rod systems product offering, we are delivering streamlined and innovative system solutions that are code compliant and cost competitive.”

New cost-saving components in Strong-Rod systems include expanding aluminum take-up devices for rods up to 1-3/4” diameter and increased shrinkage capacity, and coming soon, RTUD5 and RTUD6 ratcheting take-up devices designed for 5/8"- and 3/4"-diameter threaded rod, respectively.

Once the RTUD take-up devices are installed on top of bearing plates, a series of internal threaded wedges enable the device to ratchet down the rod as the wood structure shrinks but engage the rod in the reverse direction when under tensile loading, ensuring continuous engagement and enabling the rod system to perform as designed. Unlike similar products, the RTUD can be attached using nails or screws.

To support Designers as they determine the most appropriate solution for their mid-rise project, Simpson Strong-Tie offers:

  • A new Strong-Rod Systems Design Guide (F-L-SRS15) that provides Designers with critical information about the specific challenges and solutions available to address shear wall overturning restraint and roof uplift restraint. The 68-page guide explains three methods of specification and includes design considerations and checklists. This new guide is now available in print or for download.
  • A new Strong-Rod Systems webpage that features an interactive 3D graphic of a mid-rise building under construction, showcasing ATS and URS runs in a continuous load path.

In addition, Simpson Strong-Tie is helping Designers solve the challenges with anchoring rod systems into shallow podium concrete slabs. “We have completed three years of testing to help Designers with tested practical solutions for concrete podium slab anchorage. Anchor reinforcement details, along with patent-pending Shallow Anchor Rod Kits, make design and installation easy while developing much higher loads both mid-slab and near-edge,” said Ellis.

For more information about Strong-Rod systems, call 800-999-5099 and visit www.strongtie.com/srs.