Product Knowledge: Caring for fall protection harnesses
Jendco Safety offers tips for cleaning and maintaining fall protection products.
By Matt Johnson, Marketing Manager/IT Administrator, Jenco Safety
You probably have a dirty job and there is no way around it. But that dirt, industrial solvent, oils, built up salt from sweat and more can impact the longevity of your harness.
Just like the importance of washing the salt off your car in the winter – cleaning your PPE occasionally will pay in the long run!
Spot cleaning your equipment can usually be done with a mild detergent and a sponge or cloth. Letting it air dry afterwards.
Need to dig a little deeper? Stick to cleaning solutions that are non-corrosive or non-abrasive. Never use bleach or an acid solvent as these can damage your PPE.
Put your PPE in a mesh laundry bag to prevent snagging and unnecessary abrasion. In a clean bucket or sink, mix your solution so it is not too soapy to the touch. To much soap can make your equipment feel tacky and uncomfortable to wear.
With a non-abrasive cloth or sponge wipe any loose debris off while everything is still dry. Wet your cloth/sponge with your solution and work a lather into the area to be cleaned. Do not soak your PPE as that can damage some materials. After scrubbing rinse thoroughly with regular tap water and blot dry with a lint-free cloth.
Remove from the mesh bag and hang your equipment to air dry away from excessive heat, steam and sunlight. Be sure it hangs freely and without folds. Never machine dry your PPE or store it wet.
Once it is fully dry and clean inspect your gear before returning to active service.
What about machine washing? This can reduce the longevity of your PPE, cause fading or even soften the webbing. Always inspect your equipment and follow the instruction manual’s recommendations.
For more information on fall protection harnesses please visit us at www.jendcosafety.com.
CONTRACTOR SUPPLY MAGAZINE
The April/May 2024 issue of Contractor Supply magazine is here!
This digital edition is sponsored by BECK AMERICA Inc.
Our cover story, Masters of Fasteners, visits Interstate Screw Corp. of metro Miami, which serves the fastening needs of south Florida, the Caribbean and Central and South America.
Also in this issue,our Industry Updates cover Adhesives, Tapes and Sealants, Anchoring Systems and Safety and PPE.
This digital edition is fully searchable and contains live links to every advertiser and new product listing. Click away!
