Dynapac CC950 Small Tandem Asphalt Roller

DYNAPAC’S SMALL TANDEM ASPHALT ROLLER CC950, primarily for small-scale compaction work such as pavements, bicycle paths, small roads and parking areas; places that need compaction but are difficult to reach with a larger roller.

This small tandem roller comes with an operating mass of approximately 1.6 tons and a drum width of 38 inches.

The Dynapac CC950 is equipped with a water-cooled, three cylinder, 4-stroke Kubota D722-E4B-KEA-2 diesel engine. This is compliant with EPA Tier 4 and produces 14.9 20.3 HP (14.9 kW). Together with the large drum diameter and drive motors connected in series, it contributes to excellent accessibility and hill-climbing capacity.

The Dynapac CC950 has 4200 vpm (70 Hz) vibrations on the front drum only and a static rear drum. The rear drum is equipped with shock absorbers to minimize vibrations in the operator’s platform. The operator’s platform is very operator friendly, offering both a lot of space and ergonomically positioned steps.

In order to minimize maintenance costs, the Dynapac CC950 has long service intervals. Both the steering hitch and steering cylinder are maintenance free. The few remaining service points are easily accessible. The instrument panel has an hour meter, horn switch, warning lights for brake, battery charging indicator, engine oil pressure indicator and glow plug for aiding engine start at cold temperatures.
 
Other features and benefits:

• The water tank holds 50 gal (190 liters), gravity feed, placed above spray bars - allowing long periods of work between refills.
• A foldable ROPS is a standard option, which keeps the transport height to a minimum.
• High clearance adjacent to the edge of the drums, both on left and right side facilitates compaction close to high curbs.
• Three LED work lights
• A low total cost of ownership has always constituted guidelines for Dynapac product development. For this reason, high capacity, great reliability and premium quality are natural features in all Dynapac products. Dynapac also offers excellent access to service and a very high second-hand value.

The newly branded CC950 was debuted in the Dynapac booth at the 2018 National Pavement Expo. The unit will also be featured at The ARA Rental Show (booth #2643) and World of Asphalt (booth #3324).

Dynapac is a leading supplier of high tech soil and asphalt rollers, pavers and milling equipment, committed to strengthen customer performance. Headquartered in Wardenburg, Germany, Dynapac has production facilities in Europe, South America, and Asia. Dynapac is part of the FAYAT Group. The North America customer support center is located in Fort Mill, SC, with parts distribution in Charlotte, NC. www.dynapac.us.