DEWALT 20V MAX XR Cordless Metal Connector Nailer
DEWALT's 20V MAX* XR Cordless Metal Connector Nailer (MCN) with EXTREME RUNTIME (DCN693) is now available. Powered strictly by a Lithium Ion battery, this cordless Metal Connector Nailer is the only cordless MCN available on the U.S. market today and drives industry standard 35° paper collated metal connector nails from 1-1/2” to 2-1/2” in length and achieves 600 shots per charge with 1-1/2” nails on a 4.0Ah 20V MAX* DEWALT Battery.
The low-maintenance 20V MAX* Cordless Metal Connector Nailer (DCN693) is one-hundred percent battery-powered with no gas cartridge, no hose, and no compressor to maintain. With dual operating modes in both Sequential and Rapid Cycle, the Nailer allows the user to choose between sequential for standard operating speed or rapid cycle for faster operation.
A tip probe ensures precise fastener placement while multi-functional LEDs provide added convenience.
The 20V MAX* Cordless Metal Connector Nailer (DCN693) offers tool-free depth adjustment, allowing users to adjust nail depth for different materials. A convenient speed selector switch can easily change from Speed 1 for operating 1-1/2" or to Speed 2 for 2-1/2" nails while a stall release lever helps to reset the driver blade in the case of a stall or jammed nail and an onboard hex key can be used to clear tool jams for magazine removal. Finally, a belt and rafter hook rotates to either side depending on user preference.
Primarily used by framing crews, remodelers, and deck builders, the Metal Connector Nailer is also popular with users who work in natural-disaster prone areas that are hit with earthquakes, derechos and hurricanes. This tool’s use has spread nation-wide as many building codes throughout North America now require metal connectors in wood-framed buildings.
The 20V MAX* Cordless Metal Connector Nailer (DCN693) uses DEWALT MCN Nails including the DMC13115HDG.5M, DMC14815B.5M, DMC14815HDG.5M, DMC14825HDG.5M, DMC16225HDG.5M, DWMC13115-2M, and DWMC13115G-2M.
The 20V MAX* Cordless Metal Connector Nailer comes kitted (DCN693M1) and MSRP $549 with one 4.0Ah battery and charger. The 20V MAX* Cordless Metal Connector Nailer bare tool (DCN693B) MSRP $499. Available now where DEWALT products are sold, the 20V MAX* XR Cordless Metal Connector Nailer with EXTREME RUNTIME will come standard with a three-year limited warranty, 1-year free service contract and 90-day money-back guarantee.
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.